Модель
|
SGSW-24040P / SGSW-24040P4
|
Hardware Specification
|
Copper Ports |
24 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports with IEEE 802.3af PoE injector |
| SFP/mini-GBIC Slots |
4 SFP interfaces, shared with Port-21 to Port-24
100Base-FX SFP transceiver compatible |
| Switch Processing Scheme |
Store-and-Forward |
| Switch Fabric |
68Gbps |
| Address Table |
8K entries |
| Share data Buffer |
1392 kilobytes |
| Flow Control |
IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex |
| Jumbo Frame |
10Kbytes |
| LED |
System:
Power, Master, FAN Alert, PoE Power Alert
Ports:
10/100/1000 Link/Act, PoE In-Use, SFP Link, Stack Port Link |
| Dimension (W x D x H) |
440 x 300 x 44.5 mm, 1U height |
| Weight |
4.5 KG |
| Power Consumption |
SGSW-24040P: Max. 290 Watts / 818 BTU
SGSW-24040P4: Max. 430 Watts / 1364 BTU |
| Power Requirement |
AC 100~240V, 50/60Hz |
Power over Ethernet
|
PoE Standard |
IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply |
End-Span |
| PoE Power Output |
Per Port 48V DC, 350mA . Max. 15.4 Watts |
| Power Pin Assignment |
1/2(+), 3/6(-) |
| PoE Power Budget |
SGSW-24040P: 220 Watts
SGSW-24040P4: 380 Watts |
| PoE Ability |
Number of PD@7Watts
SGSW-24040P: 24
SGSW-24040P4: 24
Number of PD@15Watts
SGSW-24040P: 14
SGSW-24040P4: 24 |
Stacking
|
Stacking Ports |
Two 5Gbps HDMI-Like interface |
| Stacking Numbers |
16 |
| Stacking Bandwidth |
10Gbps (Full-Duplex) |
| Stack ID Display |
7-Segment LED Display (1~9, A~F,0) |
| Stack Topology |
Ring / Chain / Back-to-Back stack |
Layer 2 function
|
System Configuration |
Console, Telnet, Web Browser, SNMPv1, v2c and v3 |
| Port configuration |
Port disable/enable.
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Bandwidth control on each port |
| Port Status |
Display each port's speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status |
| VLAN |
802.1Q Tagged Based VLAN, up to 255 VLAN groups
Q-in-Q
Private VLAN |
| Port trunking |
IEEE 802.3ad LACP / Static Trunk
Support 12 groups of 16-Port trunk support |
| QoS |
Traffic classification based, Strict priority and WRR
4-level priority for switching
- Port Number
- 802.1p priority
- DS/TOS field in IP Packet |
| IGMP Snooping |
IGMP (v1/v2) Snooping, up to 8K multicast Groups
IGMP Querier mode support |
| Access Control List |
IP-Based ACL / MAC-Based ACL
Up to 256 entries |
| SNMP MIBs |
RFC-1213 MIB-II
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-2933 IGMP-STD-MIB ()
RFC3411 SNMP-Frameworks-MIB
IEEE802.1X PAE
LLDP
MAU-MIB |
Standards Conformance
|
Regulation Compliance |
FCC Part 15 Class A, CE |
| Standards Compliance |
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet |
